How to Program Your RAM 1500 Garage Door Opener in Under 5 Minutes

If you own a Ram 1500 with Homelink or a similar system of any year, including 2016, 17, 18, 19, 20, or 21, and have a factory-installed garage door opener, you may be wondering how to program it to open your garage door. This task can seem daunting, but it’s pretty simple – as long as you have the manual. However, if you don’t have the manual, don’t worry – we’ll walk you through the process.

So let’s get started with the guide on how to program Ram 1500 garage door opener as quickly as possible!

In case you have a manual.

Assuming you have the manual, the process for programming your garage door opener is as follows:

1. Enter your garage and park your Ram 1500 inside.
2. Locate the garage door opener unit, which is usually mounted on the ceiling near the garage door.
3. Press and hold the “learn” button on the garage door opener unit until the indicator light starts blinking.
4. Get out of your Ram 1500 and press the remote control button that you want to use to open the garage door.
5. The garage door opener unit should now be programmed, and the indicator light should be solid.

In case you don’t have a manual

The process is still relatively simple if you don’t have the manual. Just follow these steps:

1. Enter your garage and park your Ram 1500 inside.
2. Locate the garage door opener unit, which is usually mounted on the ceiling near the garage door.
3. Press and hold the “learn” button on the garage door opener unit for about 30 seconds until the indicator light starts blinking.
4. Get out of your Ram 1500 and press the remote control button that you want to use to open the garage door.
5. The garage door opener unit should now be programmed, and the indicator light should be solid.

Wanna improve the towing capacity of your RAM 1500? Here’s the full guide.

Sometimes you may also need to program the garage opener motor inside your garage manually.

If this is the case, follow these additional steps:

1. Locate the “Learn” or “training” button on your garage door opener motor unit. It is generally located near the hanging antennae.
2. Press and hold the “Learn” button for a few seconds until the indicator light starts to blink.
3. Go to your RAM 1500 and press the garage door opener button on your visor.
4. The indicator light will blink rapidly to indicate that the programming was successful.
5. Repeat these steps if you need to program additional garage door openers or remotes.

Test the opener to make sure it works

1. Open the garage door
2. Lift the hood of your car
3. Locate the small black box on the side of your engine (this is your opener)
4. Press and hold the learn button on the opener for 3 seconds
5. The light on the opener will turn off and on again – this means it’s been programmed
6. Close the garage door and test it to make sure it works properly

Improve the performance of your RAM 1500 with these cam upgrades.

Troubleshoot any problems you may encounter

If your garage door opener doesn’t seem to be working correctly, there are a few things you can try:

1. Check the batteries in your remote control. If they’re low, replace them and try again.
2. Make sure nothing obstructs the path between your remote control and the garage door opener unit.
3. If your garage door opener unit has a “force” setting, ensure it’s set properly.
4. Try resetting the garage door opener unit by pressing and holding the “learn” button for 30 seconds.
5. If all else fails, call a professional garage door opener repair person for assistance.

Conclusion

Programming your Ram 1500 garage door opener is a task that can seem daunting. Still, it’s pretty simple – as long as you have the manual. However, if you don’t have the manual, don’t worry – we have you covered above in that situation as well. Just follow the simple steps, and in just a few minutes, you’ll be able to enjoy the convenience of hands-free operation.

With just a little bit of know-how, you can easily program your Ram 1500 garage door opener and start enjoying the convenience of hands-free operation. And if you encounter any problems, call a professional for assistance.